Prototipos de PCB de forma sencilla

Servicio completo para prototipos de PCB personalizados.

Centro de Ayuda
Enviando un mensaje
9:00 - 23:00, Mon.- Sun. (GMT+8)
Líneas directas de servicio
+86 571 8531 7532

9:00 - 18:00, Mon.- Fri. (GMT+8)

9:00 - 12:00, Sat. (GMT+8)

(Excepto los días festivos chinos públicos)

¿Cómo podemos ayudar?

Notes for Gerber files Generated from Eagle 9.20

Summary:       Avoid mistakes when generating Gerber file from Eagle 9.20

Several days ago, Eagle released the lastest version 9.20, which still provide the convenient button for generating Gerber files. But what followed was some file problems.

1.When opening Eagle.brd file and clicking the "CAM processor", you need be aware of the option of soldermask layers. 

cam.png

Please uncheck the box of "Nagative Polarity" which  is checked by default, shown as below screenshot:

soldermask.png

2. To ensure the correctness and accuracy of the board outline in the profile layer, please check and add BOTH the #Dimension and #Milling into the Profile layer, shown as below:

Profile.png

Then you can choose the Gerber RS-274X or RS -274X with comments and click "Process Job" to get the Gerber files.

3. For multi-layer (more than 4 layers) PCB, if there are buried/blind vias in your boards,  then you need to generate all the drill files by right clicking "Drill -->Excellon" and choose "Geberate Excellon outouts based on PCB stackup"

1535144745404.png

Then you can "Process Job" and get all the drill files needed.

PCBWAY CAM.png

Leave a comment below if you have any questions.



Comentarios (2)
Este mensaje aquí es solo una sugerencia que complementa el contenido anterior y no para operaciones comerciales como pedidos. Si tiene alguna pregunta urgente o problemas con el pedido, comuníquese con su representante de ventas.
Solo puede subir 1 archivo en total. Cada archivo no se puede exceder los 2 MB. Admite JPG, JPEG, GIF, PNG, BMP
0 / 10000