Prototipos de PCB de forma sencilla
Servicio completo para prototipos de PCB personalizados.
9:00 - 18:00, Mon.- Fri. (GMT+8)
9:00 - 12:00, Sat. (GMT+8)
(Excepto los días festivos chinos públicos)


4 layers, Thickness: 1.12mm, Surface Finish: HASL lead free
2 layers, Thickness: 1.2mm
2 layers, Thickness: 1.6mm, Surface Finish: Immersion gold(ENIG)
6 layers, Thickness: 1.6mm, Surface Finish: Immersion gold(ENIG)
6 layers, Thickness: 2.6mm, Size: 6*6cm
10 layers, Material: FR4, Thickness: 1.6mm
6 layers, Thickness: 1.0mm, Surface Finish: Immersion gold(ENIG) 3U"
12 layers, Material: FR4, Thickness: 1.6mm
6 layers, Thickness: 1.6mm, Surface Finish: Immersion gold(ENIG)
8 layers, Material: S1000-2M, Thickness: 1.0±0.1mm
4 layers, Material: RO4350B+TU768, Thickness: 1.6mm
12 layers, Material: S1000-2M, Thickness: 1.2±0.1mm
Contáctenos!
Nuestro servicio de atención al+86-571-85317532
This project describes a 2 wheel balance robot system. There are several designs available online, but we will be creating the design from scratch. We will be designing the chassis using OnShape, a PCB board with the motors driver, IMU, encoders, and a capability to control the robot over WiFi. Later to "spice" things a bit, we will add an additional challenge to the balancing system.
Martins
5V-USB to 12V converter 1W
Naber