Riccardo Cossutta
ITALY • + Follow
Edit Project
Components
|
22pF Ceramic Capacitor |
x 2 | |
|
100nF Ceramic Capacitor |
x 2 | |
|
5mm Led |
x 1 | |
|
10K Resistor |
x 1 | |
|
220R Resistor |
x 1 | |
|
16MHz Crystal Oscillator |
x 1 | |
|
40 Pin Zif Socket |
x 1 | |
|
Button 6x6x8.5mm |
x 1 | |
|
Header Male 2.54mm 1x6 |
x 1 | |
|
Header Male 2.54mm 1x8 |
x 1 | |
|
Header Male 2.54mm 1x10 |
x 1 |
Tools, APP Software Used etc.
|
arduino IDEArduino
|
Description
MIGHTYCORE Programmer
GENERAL INFORMATION
MIGHTYCORE Programmer is an open-source shield for Arduino Uno that facilitates the writing of the bootloader to the ATmega DIP-40 family ICs (MCU 8 bit). On the shield there is a socket for inserting the IC (40-pin Zif), a LED and a 16 MHz crystal oscillator. Despite its simplicity of construction, it greatly helps the production speed of microcontrollers. The supported ICs are:
- ATmega8535
- ATmega16
- ATmega32
- ATmega164
- ATmega324
- ATmega644
- ATmega1284
HOW TO FLASH THE BOOTLOADER
PREREQUISITES
Install the MCUdude (MightyCore) libraries. For the detailed procedure click on the following link:
https://github.com/MCUdude/MightyCore#how-to-install
PROCEDURE
- Upload sketch No. 11 in the examples section to the Arduino Uno;
- Select the desired card in Tools → Card → MightyCore;
- In Tools → Programmer, select “Arduino as ISP (MightyCore)”;
- Still in the Tools section, click on “Write the bootloader”;
- If the procedure is successful, the LED on the shield will start blinking.
Schematic and Layout
CrossRoad LAB MightyCore Programmer Circuit Diagram
Schematic_CrossRoad LAB MightyCore Programmer_2021-03-24.png
Jul 12,2021
2,054 views
MIGHTYCORE Programmer
MIGHTYCORE Programmer is an open-source shield for Arduino Uno that facilitates the writing of the bootloader.
2054
2
0
Published: Jul 12,2021
BOM(Bill of materials)
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
- Engineer Jul 26,2021
- (DIY) C64iSTANBUL Jul 13,2021
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Riccardo Cossutta
- CrossRoad LAB FTDI USB to SERIAL (TTL) GENERAL INFORMATIONThe USB to Serial (TTL) FTDI is a USB to serial converter, for conversion it uses...
- MIGHTYCORE Programmer GENERAL INFORMATIONMIGHTYCORE Programmer is an open-source shield for Arduino Uno that facilitates t...
- CROSSROAD LAB MICRO 1284P GENERAL INFORMATIONMICRO 1284P is an open-source microcontroller based on the ATmega1284P. It featur...
- CROSSROAD LAB MEGA 1284P REV. 1.5 - UPDATE- This update fixed some pcb issues and made it easier to upload sketches through the serial...
- CROSSROAD LAB MEGA 1284P REV. 1.0 - OUTDATED - Update: Coming SoonGENERAL INFORMATIONMEGA 1284P is an open-source microcontroller base...
You may also like
-
Naruto Multi-color PCB printed with UV technology
22 1 1 -
-
-
-
-
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
676 0 0