Jonnathan Mackey
UNITED STATES OF AMERICA • + Follow
Edit Project
Description
Dust Collector Monitor
This is a dust collector monitor board. Both the dust bin level and the filter are monitored. When either needs your attention a strobe is activated and a message is sent to your FM or bluetooth capable hearing protector headphones. My earlier dust collector related board only monitored the bin level.
This board is designed to work with the gate sensor board. The gate sensor boards are optional although recommended. Knowing the open/closed state of the gates allows for more accurate monitoring of the filter.
For more information see my instructable on instructables.com.
Mar 04,2021
810 views
Dust Collector Monitor
2 Layers PCB 55 x 75 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
Monitors your woodworking dust collector and will alert you when either the dust bin or filter need your attention.
810
3
0
Published: Mar 04,2021
BOM(Bill of materials)
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(3)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
- David Allmon Apr 08,2021
- Stefan Reinauer Mar 16,2021
- PCBWay Support Team Mar 05,2021
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Jonnathan Mackey
- PT226x Remote v1.1 This is a remote encoder board that supports several versions of PT226x encoder chips in a number of...
- Dust Collector Monitor v4 This is the 4th version of my dust collector monitor. See my instructable for a full description of ...
- 3.5 inch 480x320 TFT Display v1.1 3.5 inch 480x320 TFT Display v1.1Display sourceThis is a 3.5 inch ILI9488 320x480 display module tha...
- 4 inch 480x320 TFT Display v1.1 4.0 inch 480x320 TFT Display v1.1Display sourceThis is a 4 inch ILI9488 320x480 display module that ...
- 12 pin FFC Display Adaptor v1.0 12 pin FFC Display Adaptor v1.0This is a breadboard adapter for use with my boards that have a 12 pi...
- ILI9488 Display Adapter v1.0 ILI9488 Display Adapter v1.0This adapter board converts the 14 pin header found on many display modu...
- Heating System Monitor This board is used to monitor the heating system in your home by reflecting the state of the alarm t...
- 4G LTE TempSensor v1.2 (SIM7000) This board is used to monitor multiple temperature sensors and report out of range conditions to you...
- 4 Port RJ11 4P4C v1.0 This board is part of a multi board project used to monitor multiple temperature sensors and report ...
- BMP280 RFM69CW Remote See my instructable for a full description of this board and the associated software.Part of my hiki...
- RFM69 3 Button Remote See my instructable for a full description of this board and the associated software.Remote control ...
- Hiking Data Logger Using RFM69CW This hiking data logger is used to record a hike’s location, start and end time, temperature, altitu...
- AVR SD Hex Loader ISP v1.4 This project is all about getting your compiled sketch onto your target board without the need to ha...
- Blast Gate Sensor This is a blast gate sensor board. This uses a 49E Hall sensor to determine if a gate is open or clo...
- Dust Collector Monitor This is a dust collector monitor board. Both the dust bin level and the filter are monitored. When e...
- AVR SD Hex Loader ISP See my instructable for a full description of this board and the associated software.Note that there...
- 5 Button Board This is a simple 5 button board. It can be used with a 2x3 2.54 header OR a 6 pin 1mm pitch FFC conn...
- 128x64 LCD Display Module This is an adapter board for a 128x64 LCD display.See https://www.aliexpress.com/item/1430380449.htm...
You may also like
-
BEAPER Nano (Beginner Electronics and Programming Educational Robot) for Arduino Nano ESP32
153 0 0 -
-
-
Open Source Very Large Stick - Freejoy & MMjoy2 breakout board
629 0 0 -
RF Control training board for students based on ESP32 C3
814 0 2 -
Aquarius+ Computer, Standard PCB
1069 0 7 -
KINETIC COASTERS with a TWIST! Laser or 3D Print some DIY Magic
684 0 1 -
RPI - 8 IO PLC With ATTiny85 Watch Dog
588 0 1