ClimatePlace3.1
The board is designed based on the "Climate Control" project and has the following features:
Compact size of 76x64mm.
Contains a compact power supply unit HLK-PM01.
Power voltage is directly connected to the fuse relay with a maximum current of 10A.
Connectors for noiseless SSR-relays have been installed.
Connectors for connecting two heaters in parallel have been installed.
Connectors for connecting external relay modules (for example, Universal B1) for controlling exhaust and humidifier have been installed.
You can opt out of the fuse and use its relay for direct heater activation. To do this, you need to solder a jumper in place of the SSR-220V connector and change the heater controller GPIO settings from 4 to 13.
ClimatePlace3.1
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(0)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Kas Dim
- Project Chick 3.2 Project Chick 3.2 by SmartESP.net
- Project SeedBox 3.2 Project SeedBox 3.2 from SmartESP.net
- Project Seed 3.2 greenhouse, seedling, incubator
- ClimatePlace 3.2 Universal! The developed scheme provides for both the placement of elements on the board and the ref...
- Climate3.2 Universal! The developed scheme provides for both the placement of elements on the board and the ref...
- ClimatePlaceHard3.1 The board is designed based on the "Climate Control" project and has the following features:Compact ...
- ClimatePlace3.1 The board is designed based on the "Climate Control" project and has the following features:Compact ...
- Climate3.1 Universal! The developed scheme provides for both the placement of elements on the board and the ref...
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
336 0 2 -
Naruto Multi-color PCB printed with UV technology
134 2 1 -
-
-
-
-