AVR Programmer W/High Voltage-328pb v1.5
AVR programmer that supports 5V, 3v3 boards/chips, as well as high voltage fuse management.
The board contains three independent sketches: ArduinoISP, AVR_HighVoltageSerialProgrammer, and NOR Flash HexCopier. See AVRMultiSketch for the source code and the OSX app I wrote to load three sketches onto the board, selected by the buttons on the board, without modifying the original sketches.
I've also designed a few accessory boards:
- ATtiny85 ICSP (DIP or SOP8)
- NOR Flash (Winbond W25Q128FVSSIG, etc.)
- ATtiny84A to ATtiny85. This plugs in directly to the HV socket or into the ATtiny85 ICSP adapter.
If you have any questions you can contact me through my thingiverse account (leave a message).
Instructions for assembling the board and loading the MultiSketch hex file is available on Instructables
This version has a USB serial interface, resettable fuses, and LED indicators showing the current function.
AVR Programmer W/High Voltage-328pb v1.5
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(4)
- Engineer Feb 26,2024
- HWboy Mar 07,2020
- Akwarandu Enyinnaya Jan 07,2020
- László Dániel Aug 08,2019
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Jonnathan Mackey
- PT226x Remote v1.1 This is a remote encoder board that supports several versions of PT226x encoder chips in a number of...
- Dust Collector Monitor v4 This is the 4th version of my dust collector monitor. See my instructable for a full description of ...
- 3.5 inch 480x320 TFT Display v1.1 3.5 inch 480x320 TFT Display v1.1Display sourceThis is a 3.5 inch ILI9488 320x480 display module tha...
- 4 inch 480x320 TFT Display v1.1 4.0 inch 480x320 TFT Display v1.1Display sourceThis is a 4 inch ILI9488 320x480 display module that ...
- 12 pin FFC Display Adaptor v1.0 12 pin FFC Display Adaptor v1.0This is a breadboard adapter for use with my boards that have a 12 pi...
- ILI9488 Display Adapter v1.0 ILI9488 Display Adapter v1.0This adapter board converts the 14 pin header found on many display modu...
- Heating System Monitor This board is used to monitor the heating system in your home by reflecting the state of the alarm t...
- 4G LTE TempSensor v1.2 (SIM7000) This board is used to monitor multiple temperature sensors and report out of range conditions to you...
- 4 Port RJ11 4P4C v1.0 This board is part of a multi board project used to monitor multiple temperature sensors and report ...
- BMP280 RFM69CW Remote See my instructable for a full description of this board and the associated software.Part of my hiki...
- RFM69 3 Button Remote See my instructable for a full description of this board and the associated software.Remote control ...
- Hiking Data Logger Using RFM69CW This hiking data logger is used to record a hike’s location, start and end time, temperature, altitu...
- AVR SD Hex Loader ISP v1.4 This project is all about getting your compiled sketch onto your target board without the need to ha...
- Blast Gate Sensor This is a blast gate sensor board. This uses a 49E Hall sensor to determine if a gate is open or clo...
- Dust Collector Monitor This is a dust collector monitor board. Both the dust bin level and the filter are monitored. When e...
- AVR SD Hex Loader ISP See my instructable for a full description of this board and the associated software.Note that there...
- 5 Button Board This is a simple 5 button board. It can be used with a 2x3 2.54 header OR a 6 pin 1mm pitch FFC conn...
- 128x64 LCD Display Module This is an adapter board for a 128x64 LCD display.See https://www.aliexpress.com/item/1430380449.htm...
-
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
507 0 2 -
Naruto Multi-color PCB printed with UV technology
190 2 1 -
-
-
-