Analogue indicator control system (VU-meter)
System descriptions (full version):
The system consists of:
- Input divider
- Input stage
- full‐wave rectifier
- output amplifier with logarithmic system
- power supply
Operating description (left channel, indicator power amplifier)
The input signal should be supplied to connector P1‐4 or P1‐5. The input sensitivity of P1‐5 is
‐20dB less. This allows to change system sensitivity depending to which input the signal is sent. It
allows controlling the indicators when the volume is low. For example in amplifier 100W: At nominal
100W signal from amplifier output to input P1 ‐5 and indicators show 0dB. At low volume the
indicators will not move because the range is about 42 db and the volume regulation range is over
70db. With the help of an external switch, the signal is supplied to P1‐4 and indicated 0dB is achieved
at 1W.
Analogue indicator control system (VU-meter)
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(2)
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by John John Vu
- Nixie bargraph thermometer with Arduino Besides the well known numerical nixie tubes, other types of neon filled tubes were also used in the...
- Сirklotron with germanium transistors Darlington output. Сirklotron with germanium transistors Darlington output.Forum:https://www.diyaudio.com/forums/solid-...
- Speaker Turn-On Delay and DC Protector Speaker protection with galvanic isolation from the amplifier.
- COMPACT CRC PSU COMPACT CRC PSU for power amplifier.
- COMPACT CRC PSU COMPACT CRC PSU for power amplifier.
- Speaker Turn-On Delay and DC Protector Simple Speaker Protection with galvanic isolation.The delay in the connection of the AC 3-4 seconds....
- Headphone amplifier Lynx HA46 Germanium output and power supply headphone amplifier.
- AD815ARB-24 headphone amplifier Composite amplifier for headphones using AD823 and AD815ARB-24.
- Salas UltraBiB positive shunt regulator mod Salas UltraBiB positive shunt regulator mod.My version of tracing printed circuit boards Salas Ultra...
- Salas UltraBiB shunt regulator (mod) Salas UltraBiB shunt regulator mod (C1 x2pc)My version of tracing printed circuit boards Salas Ultra...
- JFET Circlotrons without NFB v3 Power supply: https://www.pcbway.com/project/shareproject/Power_supply_unit_for_JFET_only_Circlotron...
- Measurement of the current of the anode of the output tubes. The system is based on the ATTINY26 [U2] microcontroller. The current measurement is carried out ind...
- Salas UltraBiB positive shunt regulator Salas UltraBiB positive shunt regulator.My version of tracing printed circuit boards Salas UltraBiB ...
- Quad 909 Stereo Power Amplifier Clone Quad 909 Stereo Power Amplifier.
- 7 Band Equalizer The module is a classic graphic equalizer system based on inductance simulation using an operational...
- Power supply unit for JFET-only Circlotron Power supply unit for JFET-only Circlotron
- Simple PP amplifier 6GK6 Tubelab Simple PP amplifier 6N2P-6GK6
- On-Off switch drives AC mains relay \ includes soft start On-Off switch drives AC mains relay \ includes soft start0https://www.diyaudio.com/community/threads...
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
262 0 1 -
Naruto Multi-color PCB printed with UV technology
111 2 1 -
-
-
-
-