New Parameters and Special Processes for Flexible PCB

Recently, PCBWay has upgraded the flexible PCB pricing page, adding new production parameters and special processes.

New parameters:

1.The number of layers has been updated to support up to 16 Layers;

2.For Polyimide base material, add “High Frequency (DKs3.6)”;

3.For the option PET in the Polyimide base material column, add “Transparent/Translucent”;

4.For FPC Thickness, add 0.025/0.05mm for one-layer boards, and 0.08mm for two-layer boards;

5.For Stiffener, add “TOP Black FR4/BOT Black FR4”;

Besides, add “0.2mm/0.4mm/0.5mm/0.6mm/0.8mm/1.0mm/1.2mm/1.5mm” in the drop-down option.

6.For Conductive double-sided tape, add new drop-down options “HT-A1134/HDF-600/without”;

7.The order quantity limit is updated to 3000 for flexible PCBs.

New Special Processes

• Stiffener between top and bottom edge connector
• Single-Side Double Access
• Stiffener between top and bottom edge connector
• Peelable soldermask
• Via filled with copper
• Edge plating
• Half-cut

In addition, we have updated the thickness of the flexible board stack-up, please visit https://www.pcbway.com/pcb_prototype/Stack_up_for_FPC.html for more information.