Product Description
I2C Interface Of Raspberry-Pi 16-way Servo Drive Board
Characteristics
- Based on Raspberry Pi 40PINGPIO interface design, it is suitable for Raspberry Pi series mainboards and Jstson Nano
- I2C interface control, only two signal lines are needed to drive the steering gear
- Up to 16 channels of ostrich or PWM output are supported, and each channel has 12-bit resolution (4096 level)
- On-board 5V voltage regulator chip, which can output 3A current and can be connected to battery for power supply through VIN terminal
- Standard onboard steering gear interface, which can be connected to SG90, MG90S, MG996R and other common steering gears
- I2C control interface is reserved for easy access to other main control boards
Product parameter
- Supply voltage: 5V (raspberry pie interface) or 6V~12V (VIN terminal) and logic voltage 3.3V
- Actuator voltage: 5V
- Driver chip: PCA9685
- Control interface: I2C
- Via hole diameter: 3.0 mm
- Product size: 65 x 30 mm
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard$18.99 or 2280 BeansRedeem Now
-
PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard$6.99 or 840 BeansRedeem Now
-
-
-
-
-
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.89 or 590 BeansRedeem Now
-
RP2040-Tiny Development Board, Based On Official RP2040 Dual Core Processor, USB Port Adapter Board Optional$4.39 or 520 BeansRedeem Now
-
RP2040-GEEK Development Board, Based On RP2040 Microcontroller, With 1.14inch 65K Color LCD$9.89 or 1200 BeansRedeem Now
-
-
-
-