DC0-100V 50A DC current and voltmeter LED dual display
Dual display voltage and current meter VC288
● High precision, high reliability, suitable for high-end applications
● With reverse connection protection, no burning if connected reversely.
The 50A voltage and current meter is equipped with an external shunt (Note: the shunt must be connected before connecting to the power supply)
Voltage measurement range: 0.0V-100V
Current test range: 0-50A
Power supply range Note: DC4-30.0V (If the voltage exceeds 30V, an external independent power supply is required)
Voltage error: ±0.1%
Current error: ±1%
External shunt specifications: 75 milliohms
Working current: <20mA
Refresh speed: about 300mS once
Display mode: Double three-digit 0.28" LED digital tube
Display color: Red+Blue
Lead length: 15cm
Dimensions: 48 x 29 x 22 mm, length X width X thickness;
Mounting hole: 46 x 27 mm
Working temperature: -10℃~65℃
Note: For a meter with a range of 50A, no matter whether the measured current is less than 10A, a shunt must be connected to measure the current! Otherwise, the meter head will be burnt.
- Comments(0)
You might like
-
-
-
-
-
-
LED aluminum substrate 1w 3w 5w lamp bead universal high power heat sink$0.20 or 20 BeansRedeem Now -
-
Mini Traffic Light 5V LED Display Module Red Green Yellow Light for Arduino Raspberry Pi$1.00 or 100 BeansRedeem Now -
-
-
4-digit 8-segment Display Module for Raspberry Pi Pico, SPI-compatible$3.99 or 480 BeansRedeem Now -
-
-
WS2812 Digital RGB LED Strip, High brightness, Energy-saving And Low power consumption, Cuttable and Programmable$4.99 or 600 BeansRedeem Now -
Electronic Clock for Raspberry Pi Pico, Accurate RTC, Multi Functions, LED Digits$23.99 or 2880 BeansRedeem Now -
RGB Full-Color LED Matrix Panel, 3mm Pitch, 64×32 Pixels, Adjustable Brightness$21.99 or 2640 BeansRedeem Now -
-
DC0-100V 50A DC current and voltmeter LED dual display
Out of stock
