ECG Pulse Sensor module

S_7933535095107.jpg

About me:

Hi, I’m an electrical engineering student at the University of California. Currently, I’m working on projects relating to health monitoring wearable devices. My research area is about developing non-invasive biosensors such as glucose sensor and heart pulse sensor.

  

Objective:

This project is to make a sensor that detects heart-rate using reflective optical sensor based on photo-plethysmography(PPG) which is a technique that measures the variation of light passing through human tissues.


Picture1.png


About the project:

The ECG Pulse Sensor module is a cost-minimized heart pulse sensor module that precisely detects the heart pulse and processes signal to the digital output which can be interfaced with microcontrollers or other digital devices.

This module is made to use with either CNY 70 or VCNT 2020 which are reflective optical sensors with infrared light emitter and phototransistor.

 

sensor.JPG

 

Placing a finger on the sensor, the variation of light will be detected by a phototransistor. The raw signal detected consists of DC and AC parts caused by the reflection of light on the finger tissue and the changing blood respectively. The signal will be processed by a high pass filter allowing only AC part which we are interested to pass. Then, the noise including 50Hz AC will be filtered out by a low pass filter. At the end, a comparator op-amp will convert the PPG signal to TTL pulses (digital signal) which are synchronous with the heartbeat.    

 op.JPG


Features:

·       Measure heart rate from your fingertip

·       Using photoplethysmography (PPG) technique

·       Operate at 3 - 5.5V range

·       Compatible with almost all micro-controller including Arduino

·       Digital pulse output

·       Built-in LED indicating heart pulse

·       CNY70 or VCNT2020 Reflective Optical Sensor

 

Application:

Heart-rate monitoring device

S_8013557395082.jpg

ox.png

The output signal can be easily read by Arduino.

 

 

### Words to PCBWay

Recently, I have been ordering PCBs from PCBWay for all my projects. Projects relating to wearable devices usually deal with SMD parts which require very precise PCB manufacturing. PCBWay provides professional PCBs quality with affordable price. 


Apply for sponsorship >>
1600+ Projects Sponsored
May 24,2018
2,644 viewsReport item
  • Comments(1)
  • Likes(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000