Product Description

1.54inch 200x200 E-Ink Display Module

Description:

This is an E-Ink display module, 1.54inch, 200 x 200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


Features:

No backlight, keeps displaying last content for a long time even when power down

Ultra low power consumption, basically power is only required for refreshing

SPI interface, for connecting with controller boards like for Raspberry Pi/Arduino/Nucleo, etc.

Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)


Specifications:

Operating voltage: 3.3V

Interface: 3-wire SPI, 4-wire SPI

Outline dimension: 48 x 33mm / 1.89 * 1.30in

Display size: 27.6 x 27.6mm / 10.09 * 10.0*in

Dot pitch: 0.138 x 0.138

Resolution: 200 x 200

Display color: black, white

Grey level: 2

Refresh power: 26.4mW(typ.)

Standby power:<0.017mW

Viewing angle: >170

VCC: 3.3V

GND: Ground

DIN SPI MOSI pin

CLK: SPI SCK pin

CS: SPI chip selection, low active

DC: Data/Command selection (high for data, low for command)

RST : External reset, low active

BUSY: Busy status output, low active          

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Product Name
    Link for reference
    Quantity