Product Description
PAM8610 2x15W Digital Two-channel Stereo Power Amplifier Board
Specification:
Working mode: Class D (PWM modulation type)
Chip selection: PAM8610
Power supply range: DC6V-15V (Nature Protection) (Recommended power: DC 12V2A)
Dimensions: 25 * 31 * 2.5mm
Channel Type: Dual Channel
Output power: 10W * 2 (8R load) / 15W * 2 (4R load) (Recommended speaker: 10-30W)
Frequency response: 20HZ-15KHZ
Quiescent current: 20mA (DC12V)
SNR: 90%
Input impedance: 20K
Output impedance: 4-8R
Harmonic Distortion: <0.1%
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
-15%
PCBWay Single-Channel Relay Module with Delayed Power-off, Triggered Delay, and Cyclical Timing Circuit Switch$1.69 or 200 BeansRedeem Now -
-
Four Way Holder V3 Development Board（Compatible with Raspberry Pi/STM32)$8.99 or 1080 BeansRedeem Now -
-
1 Channel Relay Module 5V with optocoupler Support High and Low Level Trigger$2.00 or 200 BeansRedeem Now -
-
-
USB isolator/USB to USB isolator digital signal audio power isolator ADuM3160$9.99 or 1200 BeansRedeem Now -
-
-
Dual 18650 Battery Holder V3 Development Board（Compatible with Raspberry Pi/STM32)$4.99 or 600 BeansRedeem Now -
18650 Battery Holder V3 Development Board（Compatible with Raspberry Pi/STM32)$3.99 or 480 BeansRedeem Now -
LM5122 Adjustable Step-up And Regulated Power Supply Module (12V-48V)$12.00 or 1400 BeansRedeem Now -
-
-
-
-
Power
PAM8610 2x15W Digital Two-channel Stereo Power Amplifier Board
Product ID: LP058
Out of stock
Out of stock
1772
0
US $3.00
Quantity:
Exchange
Method:
Cash
Bean
