1. Blog>
  2. Generate Gerber file from Kicad

Generate Gerber file from Kicad

by: Jul 03,2017 66050 Views 21 Comments Posted in Help Center

Gerber Kicad PCB design Tutorial

Now you can place order directly by PCBWay Plugin for KiCad


Usually, it is easier to generate Gerber files using Kicad than other PCB design software. All you need to do is to select the necessary layers and to not forget generating the DRILL file. Now, let’s get started!

1. Open your .kicad_pcb file

After opening your Kicad project - .pro file, you can double click the .kicad_pcb file or click the “PCBNew” button to open your PCB editor.

 kicad1.png

2. Plot your Kicad PCB as Gerber files

Click the “File” menu -->”Plot” and choose the necessary layers shown as below (for 2 layer boards), then click the “Plot” button to generate the related layers.

PCBNew plot.png

The necessary layers for 2-layer PCB could be:

Top Layer: pcbname.GTL

Bottom Layer: pcbname.GBL

Solder Mask Top: pcbname.GTS

Solder Mask Bottom: pcbname.GBS

Silk Top: pcbname.GTO

Silk Bottom: pcbname.GBO

Drill Drawing: pcbname.TXT

Board Outline:pcbname.GML/GKO

Note: In order to facilitate our access to your files, please do NOT check the "Include extended attributes" before Plot.

Do NOT check "Use extended X2 format", otherwise, the format will not be accpeted.


3. Generate the drill file

Before closing the plot window, you need also generate the drill for manufacturing. Select “Suppress leading zeros”  and “Minimal header” and click “Drill File” button as following shown.

1.Generate Drill.png

4. Check the Gerber files in GerbView

Now you have finished the job. But you should always check whether your Gerber files are working or not. Open the “GerbView” and check what your board looks like before sending it to manufacturer.

Gerber view.png

Now you can see your board like this.

final.png

5.Compress all the files in a single .zip file


The final step is to Compress all the files in a single .zip file, then you can fill out the form about your PCB parameters ( size, quantity , layers , thickness , etc ) on our “PCB Instant quote” page and upload your .zip ( Gerber ) file to PCBWay online system, our engineers will check it again and feedback to you if any problems happen before it can be fabricated. Here we go!


See "Generate Position File in Kicad"

Check for Kicad 5.1.6

https://www.pcbway.com/blog/help_center/Generate_Position_File_in_Kicad.html

Join us
Wanna be a dedicated PCBWay writer? We definately look forward to having you with us.
  • Comments(21)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
    Back to top